The Stone Plate

Product Note

Product includes one solid marble wall plate only. No electrical components included.

Installation Steps

Important: Use a hand screwdriver — not a power drill — to insert and secure the screws. Marble is a natural stone, and the torque from a power drill can crack or chip the plate.

Step 1: Turn Off the Power
As a safety precaution, turn off the power to the outlet or switch area at your home’s circuit breaker, even though you're only replacing the plate.

Step 2: Remove Existing Plate
Use a screwdriver to loosen and remove the screws on your current wall plate. Gently lift it away from the wall.

Step 3: Inspect Underlying Devices
Confirm that your dimmers, toggles, outlets, or other modules are properly secured and undamaged.

Step 4: Position the Marble Plate
Align the new marble plate over the existing devices, ensuring all openings fit cleanly around the controls.

Step 5: Insert Screws
Use the included matching screws to secure the plate in place. Start threading gently by hand to avoid stripping the screw holes.

Step 6: Do Not Overtighten
Tighten the screws just enough to hold the plate snugly against the wall; overtightening may damage the marble or wall surface.

Step 7: Check the Fit
Make sure the plate sits flush, and all device cutouts are aligned for easy access and smooth functionality.

Step 8: Restore Power
Turn the power back on at the circuit breaker once you confirm everything is secure and properly positioned.

Step 9: Final Polish
Gently wipe the marble surface with a soft cloth to remove any fingerprints or dust from handling.

If you notice any misalignment or feel unsure, consult a licensed professional.